SECTION 307-01: Automatic Transmission — 6F50/6F55
2014 Flex Workshop Manual
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Procedure revision date: 05/02/2013

Transaxle Case


Special Tool(s)
Bearing Cup Installer
307-576
Bearing Cup Installer
307-689
Differential Bearing Cup Remover
307-586
Drawbar (Heavy Duty Threaded)
204-029 (T77F-1176)
Handle
205-153 (T80T-4000-W)
Installer, Transfer Gear Bearing
307-541
Oil Dam Seal Installer
307-583
Remover/Installer, Front Wheel Hub
204-069 (T81P-1104-C)
Transfer Gear Bearing Race Remover
307-577

Exploded View

Item Part Number Description
1 7H344 Transfer shaft roller bearing cup
2 7L276 Transfer shaft tube fluid dam
3 1177 Halfshaft seal
4 4222 Differential bearing cup
5 7J283 Park rod guide plate bolts (2 required)
6 7D419 Park rod guide plate
7 7D070 Park pawl return spring
8 7D071 Park pawl shaft
9 7A441 Park pawl
10 7D412 Parking pawl abutment pin (2 required)
11 7G101 Parking pawl abutment
12 7005 Transmission case

Disassembly

  1. Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Transfer Gear Bearing Race Remover 307-577
  1. Punch a hole in the fluid dam. Center punch.
  1. General Equipment: Dent Puller
  1. Special Tool(s): Differential Bearing Cup Remover 307-586
    1. Position the Differential Bearing Cup Remover 307-586 in the transmission case with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the transmission case.
    1. Expand the Differential Bearing Cup Remover 307-586 by hand.
    1. While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the transmission case, tighten the nut.
  1. General Equipment: Shop Press

Assembly

  1. Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583
  1. Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583
  1. Inspect the transfer shaft fluid dam to be sure it is seated evenly into the transmission case. Visual check.
  1. Special Tool(s): Bearing Cup Installer 307-576
    General Equipment: Shop Press
  1. Special Tools(s): Bearing Cup Installer 307-689
  1. Special Tool(s): Bearing Cup Installer 307-689, Installer, Transfer Gear Bearing 307-541, Drawbar 204-029
  1. Remove the torque converter housing differential and transfer shaft bearing races to select a new differential or transfer shaft shim. Refer to Torque Converter Housing .