SECTION 310-01: Fuel Tank and Lines
| 2014 Flex Workshop Manual
|
REMOVAL AND INSTALLATION
| Procedure revision date: 05/02/2013
|
| Item | Part Number | Description |
|---|---|---|
| 1 | 9C268 | Fuel tank filler pipe locking cap (optional) |
| 2 | 9K072 | Fuel tank filler pipe information bezel |
| 3 | W505255 | Fuel tank filler pipe bolt |
| 4 | W525936 | Fuel tank filler pipe hose clamp |
| 5 | — | Fuel tank filler pipe hose (part of 9034) |
| 6 | 9034 | Fuel tank filler pipe assembly |
| Item | Part Number | Description |
|---|---|---|
| 1 | 9C385 | FP module lock ring |
| 2 | 9H307 | FP module |
| 3 | 9A299 | Fuel Level Sender |
| 4 | 9276 | FP module O-ring seal |
| 5 | — | Fuel vapor tube assembly-to-fuel tank filler pipe recirculation tube quick connect (part of 9C047) |
| 6 | — | Fuel tank wire harness electrical connector (part of 14407) |
| 7 | — | FP module electrical connector (part of 14407) |
| 8 | — | Fuel tank jumper tube-to- FP module quick connect coupling (part of 9J337) |
| 9 | 9A089 | Fresh air hose vent cap |
| 10 | — | Evaporative Emission (EVAP) canister fresh air hose pin-type retainer (part of 9S321) |
| 11 | W506433-5439 | Fuel tank strap bolt (4 required) |
| 12 | 9055 | Fuel tank strap |
| 13 | 9002 | Fuel tank |
| 14 | 9A031 | Fuel tank heat shield |
| 16 | 9276 | Sending unit O-ring seal |
| 17 | 9275 | Fuel level sensor assembly |
| 18 | 9C335 | Fuel level sensor lock ring |