SECTION 211-04: Steering Column
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Steering Wheel

Removal and Installation

NOTICE: Do not allow the clockspring to rotate while the steering wheel is disconnected or damage to the clockspring may result. If there is evidence that the clockspring has rotated, the clockspring must be recentered. Refer to Section 501-20B .

NOTE: Removal steps in this procedure may contain installation details.

  1. Remove the driver air bag module. Refer to Section 501-20B .
    1. Discard the specified component. Follow local disposal regulations.
      • To install, tighten the new bolt to 47 Nm (35 lb-ft).
    1. -
  1. Apply tape to specified component or area.
  1. To install, reverse the removal procedure.