SECTION 211-05: Steering Column Switches
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Steering Wheel Switch


Item Part Number Description
1 3600 Steering wheel
2 9C888 RH steering wheel switch
3 9C888 LH steering wheel switch
4 — Electrical connector (part of 14672)

Removal and Installation

  1. Remove the driver air bag module. For additional information, refer to Section 501-20B .

  1. NOTE: Rotate the steering wheel to access the top 2 screws.

    Remove the 3 steering wheel switch trim bezel screws.
  1. Disconnect the steering wheel switch electrical connectors.
  1. Remove the steering wheel switch trim.
  1. Release the 4 retainer tabs on the backside of the steering wheel trim and remove the steering wheel switch.
  1. To install, reverse the removal procedure.