SECTION 412-01: Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Ambient Air Temperature Sensor


Item Part Number Description
1 W711685 Front bumper cover bolt (2 required)
2 W706350 Front bumper cover scrivet (4 required)
3 — Ambient temperature sensor electrical connector (part of 14290)
4 12A647 Ambient temperature sensor

Removal and Installation

  1. Remove the 2 front bumper cover bolts.
  1. Remove the 4 front bumper cover scrivets.
  1. Working through the front bumper cover hood latch opening, detach the ambient temperature sensor pin-type retainer from the bumper beam.
  1. Position the ambient air temperature sensor through the radiator grille opening to allow access to the electrical connector.
  1. Disconnect the ambient air temperature sensor electrical connector and remove the ambient air temperature sensor.
  1. To install, reverse the removal procedure.