SECTION 412-01: Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Evaporator Core

Removal and Installation

NOTE: The evaporator core is available only as part of the evaporator core housing assembly.

  1. Remove the heater core and evaporator core housing. For additional information, refer to Heater Core And Evaporator Core Housing in this section.
  1. Transfer the components from the old housing to the new housing as needed.
  1. Install the heater core and evaporator core housing. For additional information, refer to Heater Core And Evaporator Core Housing in this section.