SECTION 412-01: Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Heater Core


Item Part Number Description
1 19B588 Dash panel seal
2 W701696 Heater core tube support bracket screw (3 required)
3 18A456 Heater core tube support bracket
4 W701696 Plenum chamber screw (10 required)
5 18476 Heater core

Removal and Installation

NOTE: If a heater core leak is suspected, the heater core must be pressure leak tested before it is removed from the vehicle. For additional information, refer to Section 412-00 .

  1. Remove the heater core and evaporator core housing. For additional information, refer to Heater Core And Evaporator Core Housing in this section.
  1. Remove the dash panel seal.
  1. Remove the 3 heater core tube support bracket screws and heater core tube support bracket.
  1. Remove the 10 plenum chamber screws and separate the heater core and evaporator housing.
  1. Remove the heater core.
  1. To install, reverse the removal procedure.