SECTION 412-01: Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Heating Ventilation Air Conditioning (HVAC) Module


Item Part Number Description
1 19980 HVAC module
2 — HVAC module electrical connector (part of 14401) (2 required)

Removal and Installation

  1. Remove the RH instrument panel side finish panel.
  1. Release the 2 glove compartment bumpers and lower the glove compartment.
  1. Detach the HVAC module from the bracket.
    1. Release the 2 HVAC module bracket clips.
    1. Rotate the bottom of the HVAC module outward to detach it from the bracket.
    1. Lower the HVAC module to allow access to the electrical connectors.
  1. Disconnect 2 HVAC module electrical connectors and remove the HVAC module.
  1. To install, reverse the removal procedure.