SECTION 412-01: Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Mode Door Actuator — Defrost/Panel/Floor Door


Item Part Number Description
1 — Defrost/panel/floor mode door actuator electrical connector (part of 14401)
2 W701696 Defrost/panel/floor mode door actuator screw (3 required)
3 19E616 Defrost/panel/floor mode door actuator

Removal and Installation

  1. Remove the steering column. For additional information, refer to Section 211-04 .
  1. Remove the IPC . For additional information, refer to Section 413-01 .
  1. Remove the speed control deactivator switch.

  1. NOTE: The upper rear mode door actuator screw can be accessed through the instrument cluster opening using a swivel-type socket and extension.

    Remove the 3 defrost/panel/floor mode door actuator screws.
  1. Disconnect the defrost/panel/floor mode door actuator electrical connector.
  1. Remove the defrost/panel/floor mode door actuator.
  1. To install, reverse the removal procedure.