SECTION 412-02: Auxiliary Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Auxiliary Blower Motor


Item Part Number Description
1 — Auxiliary blower motor electrical connector (part of 19949)
2 — Auxiliary wire harness clip (part of 19949) (2 required)
3 — Auxiliary blower motor screw (3 required)
4 19805 Auxiliary blower motor

Removal and Installation

  1. Remove the LH quarter trim panel. For additional information, refer to Section 501-05 .
  1. Disconnect the auxiliary blower motor electrical connector.
  1. Detach the 2 auxiliary wire harness clips from the auxiliary heater core and evaporator core housing and position the wire harness away from the blower motor.
  1. Remove the 3 auxiliary blower motor screws.
  1. Remove the auxiliary blower motor.
  1. To install, reverse the removal procedure.