SECTION 412-02: Auxiliary Climate Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Auxiliary Temperature Blend Door Actuator


Item Part Number Description
1 W701696 Auxiliary temperature blend door actuator screw (2 required)
2 — Auxiliary temperature blend door actuator electrical connector (part of 19949)
3 19E616 Auxiliary temperature blend door actuator

Removal and Installation

  1. Remove the LH quarter trim panel. For additional information, refer to Section 501-05 .
  1. Remove the 2 auxiliary temperature blend door actuator screws.
  1. Disconnect the auxiliary temperature blend door actuator electrical connector.
  1. Remove the auxiliary temperature blend door actuator.
  1. To install, reverse the removal procedure.