SECTION 413-06: Horn
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Horn


Item Part Number Description
1 — Electrical connector (part of 14290)
2 W710500 Horn bracket bolt
3 13832 Horn

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the 4 screws from the lower splash shield and set aside.

  1. NOTE: The horn and bracket are installed as an assembly.

    Remove the bolt and the horn.
  1. To install, reverse the removal procedure.