2014 Flex Workshop Manual

SECTION 414-01: Battery, Mounting and Cables	2014 Flex Workshop Manual
DIAGNOSIS AND TESTING	Procedure revision date: 05/02/2013

Battery

Special Tool(s)
	GR1 190 V3.0 Intelligent Diagnostic Charger 162-00036

Pinpoint Test A: Battery Condition Test

Diagnostic Overview

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Section 100-00 for more information.

Normal Operation

Battery condition is determined by measuring battery terminal voltage after a specific discharge current is applied for a specified time period.

Visual Inspection and Diagnostic Pre-checks

Inspect wiring, terminals and connectors
Inspect the battery
Inspect battery mounting
Inspect high current BJB connections

PINPOINT TEST A: BATTERY CONDITION TEST

Test Step	Result / Action to Take
A1 TEST THE BATTERY CONDITION
NOTE: A red test-eye indicates the battery is discharged, not necessarily damaged. NOTE: Failure to fully charge the battery before retesting may cause false readings. Using the Intelligent Diagnostic Charger and the battery cables removed from the battery, verify the battery condition. Is the battery OK?	Yes RETURN the battery to service. No If the analyzer reads REPLACE BATTERY or REPLACE-BAD CELL, INSTALL a new battery. Refer to Battery .