SECTION 414-01: Battery, Mounting and Cables
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Battery Current Sensor


Item Part Number Description
1 — Battery terminal nut (part of 14B060) - 9 Nm (80 lb-in)
2 14B357 Battery current sensor
3 — Negative battery cable terminal (part of 14B060)
4 — Battery current sensor electrical connector (part of 14B060)

Removal

  1. Remove the nut and position the negative battery cable terminal aside.
  1. Remove the ACL outlet pipe and cover. For additional information, refer to Section 303-12 .
  1. Disconnect the battery current sensor electrical connector.

  1. NOTE: Note the orientation and position of the battery current sensor tape tab.

    Index-mark the battery cable at the battery current sensor. Remove and discard the tape securing the battery current sensor to the battery cable and remove the battery current sensor.

Installation

  1. NOTE: The battery current sensor must be installed in the proper position and orientation to function correctly.

    With the battery current sensor tape tab pointing downward, position the battery current sensor to the index-mark on the battery cable and secure with electrical tape.
  1. Connect the battery current sensor electrical connector.
  1. Install the ACL outlet pipe and cover. For additional information, refer to Section 303-12 .
  1. Connect the negative battery cable terminal to the battery terminal and install the battery terminal nut.