SECTION 415-00A: Information and Entertainment Systems — 4.2-Inch (107 mm) Screen, 6 Speakers
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Microphone


Item Part Number Description
1 19A391 Microphone
2 — Microphone electrical connector (part of 14334)

Removal

  1. Using a suitable tool, (such as a thin small flat head screwdriver) twist and pry the microphone bezel from the headliner metal mounting bracket.
  1. Remove the microphone from the headliner by grasping the microphone pigtail.

Installation

  1. Reconnect the microphone electrical connector.
  1. Wrap the connection with anti-rattle tape.
  1. Feed the microphone pigtail into the headliner through the microphone hole.
  1. Snap the microphone into the headliner mounting bracket.