SECTION 415-00B: Information and Entertainment Systems — 8-Inch (203 mm) Touchscreen, 7 Speakers
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013
Accessory Protocol Interface Module (APIM)
Removal and Installation
Remove the Front Display Interface Module (FDIM). Refer to
Front Display Interface Module (FDIM)
.
Remove the 4 screws and remove the Accessory Protocol Interface Module (APIM) from the
FDIM
.
To install, tighten to 0.6 Nm (5 lb-in).
To install, reverse the removal procedure.
Program the
APIM
. Refer to
Accessory Protocol Interface Module (APIM) Programming — Module Replacement
.
