SECTION 415-00C: Information and Entertainment Systems — Sony® Sound 8-Inch (203 mm) Touchscreen, 12 Speakers
2014 Flex Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 05/02/2013

Touchscreen Calibration

NOTE: Recalibrate the touchscreen by following the scan tool prompts or the steps below.

  1. Make sure the vehicle battery is fully charged in order to avoid an inoperative touchscreen.
  1. Turn the ACM on.
  1. While in AM/FM mode, press and hold the EJECT button, and within 1 second, press the SEEK UP button.
  1. Press and hold the seek down button to enter the touchscreen calibration.
  1. Touch and hold the touch points as they appear on the touchscreen (a stylus is not required).
  1. When “New calibration settings have been measured. Press the Enter key to accept the new settings.” is displayed, touch anywhere on the screen to accept the new settings.
  1. Clear all CMDTCs .