Headlamp Bulb

Removal

 WARNING: The bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.

NOTE: The headlamp bulb should not be removed from the headlamp assembly until just before a new bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp assembly where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp assembly.

NOTE: Make sure the headlamp switch and ignition switch are in the OFF position.

High Intensity Discharge (HID) bulb

1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly .

Any bulb type

3. NOTE: The headlamp assembly is shown removed for clarity. The halogen headlamp bulbs are accessed from the engine compartment without removing the headlamp assembly.

Installation

1. To install, reverse the removal procedure.