SECTION 417-01: Exterior Lighting
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Fog Lamp


Item Part Number Description
1 — Fog lamp electrical connector (part of 14290)
2 17E811/17E810 Fog lamp bezel (LH/RH)
3 15K200 Fog lamp

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the front bumper cover lower air deflector. For additional information, refer to Bumper — Exploded View, Front in Section 501-19 .
  1. Disconnect the fog lamp electrical connector.
  1. Release the 4 tabs and remove the fog lamp bezel.
  1. Release the 2 locking tabs and remove the fog lamp.
  1. To install, reverse the removal procedure.