2014 Flex Workshop Manual

SECTION 417-02: Interior Lighting	2014 Flex Workshop Manual
REMOVAL AND INSTALLATION	Procedure revision date: 05/02/2013

Interior Lamp

Front Interior Lamp

NOTE: Overhead console with roof opening panel shown, other consoles similar.

Item	Part Number	Description
1	13776	Lamp assembly
2	74519A70	Overhead console
3	—	Overhead console electrical connectors (part of 14334)

Second Or Third Row Interior Lamp

Item	Part Number	Description
1	13783	Interior lamp lens
2	13776	Interior lamp
3	—	Interior lamp electrical connector (part of 14334)

Removal and Installation

Front interior lamp

NOTE: Do not pull down on the front of the overhead console.
Pull down on the rear of the overhead console to remove the overhead console from the retaining clips.
- Disconnect the electrical connectors.

Release the 4 retaining clips and remove the lamp assembly from the overhead console.

Release the 6 retaining clips and remove the lens from the lamp assembly.
- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.
  Replace the bulb(s) as necessary.

Second or third row interior lamp

Remove the interior lamp lens.

Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.

All interior lamps

To install, reverse the removal procedure.