SECTION 419-01B: Anti-Theft — Passive Anti-Theft System (PATS), Without Intelligent Access (IA)
2014 Flex Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 05/02/2013

Passive Anti-Theft System (PATS) Parameter Reset

  1. Turn the key from OFF to RUN.
  1. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.

  1. NOTE: If the BCM was replaced, at least 2 keys must be programmed to the BCM . After completing step 3, leave the scan tool connected and REFER to Erase All Keys and Program Two Keys .

    From the scan tool, select "Parameter Reset" and follow the IDS on-screen instructions.