SECTION 419-01C: Anti-Theft — Passive Anti-Theft System (PATS), With Intelligent Access (IA)
2014 Flex Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 05/02/2013

Key Programming — Erase All Key Codes and Program Two Keys

NOTE: This procedure erases all programmed ignition keys from the vehicle memory. The vehicle cannot start until a minimum of 2 keys are programmed into the BCM .

NOTE: This procedure erases all MyKey® features on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

NOTE: To enter PATS security access if no programmed IA keys are available, start a vehicle session using a tear tag or PCM part number. PATS security access can still be granted even with the ignition off.

  1. From the scan tool, enter TOOLBOX. Select BODY>SECURITY>PATS Functions and follow the IDS on-screen instructions to PATS security access.
  1. From the scan tool menu, select "Ignition Key Code Erase" and follow the IDS on-screen instructions until the key erase procedure completes.
  1. All keys are now erased. Leave the scan tool connected and program 2 keys. REFER to Key Programming Using Diagnostic Equipment .