SECTION 419-01C: Anti-Theft — Passive Anti-Theft System (PATS), With Intelligent Access (IA)
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Passive Start Antenna — Front


Item Part Number Description
1 — Floor console
2 — Front passive start antenna electrical connector (part of 14B079)
3 W713358 Front passive start antenna screws (2 required)
4 15603 Front passive start antenna

Removal and Installation

  1. Remove the floor console. For additional information, refer to Section 501-12 .
  1. Pull the red lock tab outward and disconnect the front passive start antenna electrical connector.
  1. Remove the 2 screws and the front passive start antenna.
  1. To install, reverse the removal procedure.