Seat Backrest Heater Mat — Second Row, 40 Percent

Removal

NOTICE: The heater mat is not designed to be separated from the foam pad. Doing so will damage the foam pad. Install a new foam pad and heater mat. Failure to follow this instruction can result in seat component damage and system failure.

NOTE: For parts identification and location, refer to Seat — Exploded View, Second Row in this section.

1. Remove the backrest cover. For additional information, refer to Seat Backrest Cover — Second Row, 40 Percent in this section.

2. Lift the backrest foam pad away from the backrest frame, cut the tie strap, disconnect the backrest heater mat electrical connector and detach the retainer. Discard the backrest foam pad and heater mat.

Installation

1. Position a new backrest foam pad with a heater mat onto the backrest frame.

2. Connect the backrest heater mat electrical connector, attach the retainer and tie strap the wire harness in place.

3. Install the backrest trim cover. For additional information, refer to Seat Backrest Cover — Second Row, 40 Percent in this section.