Window Regulator Motor — Front Door

Removal and Installation

NOTE: The LF window motor must be de-initialized, then initialized whenever the window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.

1. Remove the front door regulator and motor assembly. For additional information, refer to Window Regulator and Motor — Front Door in this section.

2. Remove the 3 regulator motor screws and the regulator motor.

3. To install, reverse the removal procedure.
   • If installing a new LF window regulator motor, initialize the window regulator motor. If reinstalling the original LF window regulator motor, de-initialize, then initialize the window regulator motor. For additional information, refer to Window Motor Initialization in this section.