SECTION 206-06: Hydraulic Brake Actuation
| 2014 Flex Workshop Manual
|
DIAGNOSIS AND TESTING
| Procedure revision date: 05/02/2013
|
DTC Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Section 100-00 for information about these practices.
Steering Column Control Module (SCCM) DTC Chart
| DTC | Description | Action |
|---|---|---|
| B1368:11 | Adjustable Pedal Position Feedback Sensor: Circuit Short to Ground | GO to Pinpoint Test A . |
| B1368:12 | Adjustable Pedal Position Feedback Sensor: Circuit Short to Battery | GO to Pinpoint Test A . |
| B1369:09 | Pedal Adjustment Switch: Component Failure | INSTALL a new adjustable pedals control switch. REFER to
Adjustable Pedals Control Switch
in this section. TEST the system for normal operation.
If the concern still exists, INSTALL a new SCCM . REFER to Section 211-05 . |
| B137D:18 | Pedal Adjustment Motor: Circuit Current Below Threshold | GO to Pinpoint Test B |
| B137D:19 | Pedal Adjustment Motor: Circuit Current Above Threshold | GO to Pinpoint Test B |
| B137D:71 | Pedal Adjustment Motor: Actuator Stuck | GO to Pinpoint Test B |
| — | All Other SCCM DTCs | REFER to Section 211-05 . |
Symptom Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Section 100-00 for information about these practices.
| Condition | Possible Sources | Action |
|---|---|---|
|
|
|
|
| |
|
| |
|
| |
|
|