SECTION 206-09: Anti-Lock Brake System (ABS) and Stability Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Anti-Lock Brake System (ABS) Module


Item Part Number Description
1 13254806 ABS module screws (4 required)
2 2C219 ABS module

Removal and Installation

NOTICE: Electronic modules are sensitive to electrical charges. The Anti-lock Brake System (ABS) module can be damaged if exposed to these charges.

  1. Remove the Hydraulic Control Unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) in this section.
  1. Remove and discard the 4 screws.
  1. Remove the ABS module.
  1. To install, reverse the removal procedure.